Skip to main content

Makro•Grip® 77, Center Jaw + Spindle jaw width 77 mm, jaw thickness 27 mm, spindle length 135 mm Item No. 48120-TG7727

jaw thickness 27 mm, spindle length 135 mm
jaw thickness 17 mm, spindle length 100 mm jaw thickness 27 mm, spindle length 100 mm jaw thickness 17 mm, spindle length 135 mm jaw thickness 27 mm, spindle length 135 mm jaw thickness 17 mm, spindle length 175 mm jaw thickness 27 mm, spindle length 175 mm jaw thickness 17 mm, spindle length 215 mm jaw thickness 27 mm, spindle length 215 mm

Address

Lang Technik USA
1020 James Dr., Suite I
73271 Hartland, WI 53029

Key data at a glance

If required, the Makro•Grip® 5-Axis vice can be converted into a multiple clamping vice. During the conversion, which can be carried out in a few moments, only the set of spindle + centre piece from the 5-Axis vice has to be replaced by the centre jaw + spindle. The thickness of this centre jaw is 27 mm. In order to realise an enlarged clamping range of 5 mm on both sides, the same centre jaw is also available with a thickness of 17 mm.

Spindle length
135 mm (5.31")
Clamping range
2 x 45 mm (1.77")
Thread pitch
M16 x 1.5
Dimensions
Jaw width: 77 mm (3.03")
Workpiece shape
cubic
Packaging Unit
1 Piece
Weight
0.8 kg (1.76 lbs)
Material
Steel
Notice:
Scope of delivery:

Makro•Grip® Stamping Technology and Raw Part Clamping

The Makro•Grip® 5-Axis Vise and its unique benefits of the stamping technology has been considered „The Original“ and a benchmark in the 5-face machining of raw parts for years. Its compact design and high holding forces make the Makro•Grip® 5-Axis Vise the ideal clamping device for machining raw parts.

  • Holding force Thanks to the form-fit clamping principle, highest holding forces can be achieved with Makro•Grip®, even at low clamping pressure.
  • Process reliability Clamping with Makro•Grip® provides maximum process reliability and is easy on the workpiece to be processes at the same time.
  • Accessibility The compact Makro•Grip® self-centering vises guarantee ideal accessibility in the 5-axis machining of raw parts.

Learn all about the benefits and functionality of ourMakro•Grip® Raw Part Clamping and Stamping Technology.

Discover now

Downloads

CAD models
Data sheet

Makro•Grip® Raw Part Clamping and Stamping Technology

Discover now:

Clamping parts by form-fit – For years the Makro•Grip® technology has been the benchmark in the 5-axis machining of raw material.

Learn more
Makro•Grip® Raw Part Clamping and Stamping Technology