Skip to main content
New
Patent pending

Makro•Grip® FS 77, 5-Axis Vise Jaw width 46 mm, Clamping range 0 - 85 mm, with continuous / full serration Item No. 48085-46 FS

Please note: For clamping pre-stamped workpieces in Makro•Grip® FS 5-axis vises, you need the matching stamping jaws of the new Makro•Grip® FS series.

Learn more

Clamping range 0 - 85 mm, with continuous / full serration
Clamping range 0 - 85 mm, with continuous / full serration Clamping range 0 - 120 mm, with continuous / full serration

Address

Lang Technik USA
1020 James Dr., Suite I
73271 Hartland, WI 53029

Key data at a glance

The Makro•Grip® FS 5-Axis Vise is the perfect clamping device for machining unmachined parts on five sides - or even in one clamping operation. Due to its compact design and low interference contours, it allows optimum access to the workpiece. With its form fit clamping principle, which requires only minimal clamping pressure, the workpiece can be securely clamped without distortion or wear. Thanks to its continuous holding serration (full serration), users benefit from even higher holding forces and thus an increased safety in workpiece clamping.

Clamping range
0 - 85 mm (0" - 3.35")
Dimensions
102 x 77 x 65 mm (4.02" x 3.03" x 2.56")
Clamping method
by form-fit / by friction
Workpiece shape
cubic
Packaging Unit
1 Piece
Weight
2.06 kg (4.54 lbs)
Material
Steel

More features:

Torque

60 Nm

Maximum allowed torque

Clamping stud size

16 mm (0.63")

Diameter of clamping studs

Clamping force

14.000 N

Clamping force at maximum torque

Centering accuracy

±0,02 mm

Centering tolerance of vises

Grid system

52 mm (2.05")

Zero-point pitch

Single components features:

Clamping Studs

Diameter
16 mm (0.63")
For grid size
52
Threaded pin
M8

Spare Jaws

Dimensions
Jaw width: 46 mm (1.81")

Spindle + Center Piece

Spindle length
100 mm (3.94")
Thread pitch
M16 x 1.5
Notice:
Scope of delivery:

Makro•Grip® FS Stamping Technology and Raw Part Clamping

The Makro•Grip® 5-Axis Vise and its unique benefits of the stamping technology has been considered „The Original“ and a benchmark in the 5-face machining of raw parts for years. Makro•Grip® FS is the further development of this product. Its compact design and high holding forces make the Makro•Grip® FS 5-Axis Vise the ideal clamping device for machining raw parts.
  • Holding force Thanks to a new stamping and holding serration, up to 60% higher holding forces can be achieved with Makro•Grip® FS.
  • Process reliability Clamping with Makro•Grip® FS offers maximum process reliability and allows even higher cutting rates and faster milling processes.
  • Accessibility The compact Makro•Grip® FS self-centering vises guarantee ideal accessibility in the 5-axis machining of raw parts.

Downloads

CAD models

Services

We will be happy to advise you individually and adapt your products for the best possible application.

Contact us